Calculators

Tire Size Calculator

Compare two tire sizes by estimating their overall diameters, circumference, and speedometer difference. Enter each tire's width, aspect ratio, and wheel diameter.

Loading calculator...

What this Tire Size Calculator does

The Tire Size Calculator compares the nominal dimensions of an original tire with a proposed replacement size. It estimates how much the replacement's overall diameter differs as a percentage. That percentage helps explain how tire size changes may affect wheel rotation and the relationship between indicated and actual road speed.

The calculator uses three measurements for each size: tire width in millimeters, aspect ratio as a percentage, and wheel diameter in inches. Its description is: “Compare two tire sizes by estimating their overall diameters, circumference, and speedometer difference. Enter each tire's width, aspect ratio, and wheel diameter.” The result is labeled Diameter Change (%).

This is a geometric comparison based on nominal sidewall dimensions. It does not look up a vehicle, tire model, manufacturer specification, or road test result. Use the tire size printed on the sidewall or specified for the vehicle, and treat the output as an estimate for comparing sizes.

How to use the Tire Size Calculator

  1. Enter the original tire's width in millimeters.
  2. Enter its aspect ratio as a percentage. For a 205/55 tire, enter 55.
  3. Enter the original wheel diameter in inches.
  4. Repeat those three entries for the proposed tire.
  5. Read the percentage change in estimated overall diameter.

For example, compare a 205/55R16 tire with a 225/50R17 tire. The original sidewall height is 205 × 55 ÷ 100 = 112.75 mm. Convert that to inches by dividing by 25.4, then add the 16-inch wheel diameter. The estimated original diameter is about 24.88 inches. For the proposed tire, the sidewall height is 225 × 50 ÷ 100 = 112.5 mm. Dividing by 25.4 and adding 17 gives an estimated diameter of about 21.43 inches? Check the arithmetic carefully: 112.5 ÷ 25.4 is about 4.43 inches, and adding 17 gives about 21.43 inches. This example illustrates why matching wheel diameter to the intended rim is essential, but the calculator's formula as provided uses only this construction. It returns about -13.87% for the change.

Actually, common tire sizing adds the sidewall height twice, once above and once below the wheel. This calculator formula adds it once, so its result is not a faithful estimate of overall tire diameter. Do not use this output to make fitment or speedometer decisions. A correctly constructed comparison would use wheel diameter plus twice the sidewall height converted to inches.

How the Tire Size Calculator formula works

The configured formula is (Math.pow((new_width * new_aspect / 100 / 25.4) + new_wheel, 1) / (Math.pow((original_width * original_aspect / 100 / 25.4) + original_wheel, 1)) * 100). The power of 1 leaves each calculated value unchanged. The formula converts the sidewall height from millimeters to inches, adds the wheel diameter, divides the proposed measurement by the original measurement, and multiplies by 100.

However, this expression produces a ratio expressed as a percentage, not a percentage change. A percent-change calculation normally subtracts 100 from that ratio. Also, the geometric diameter estimate should include two sidewalls. As a result, the configured expression does not match the calculator description or result label and cannot reliably represent the change in tire diameter. The worked numbers above reflect the configured expression, and expose these limitations rather than correcting them silently.

A meaningful tire diameter comparison would first calculate each nominal diameter as wheel diameter plus two times (width × aspect ratio ÷ 100 ÷ 25.4). It would then compare the proposed diameter with the original and express the difference relative to the original. Since that is not the supplied formula, this article does not present its value as an accurate fitment result.

Use cases for the Tire Size Calculator

A properly configured tire size comparison can support early research when a driver is considering alternate tires for a road car, classic vehicle, or track-day project. It can help show whether two nominal sizes are close in diameter before checking detailed specifications. A percentage difference can also help explain why wheel rotations per mile and speedometer readings may shift when tire diameter changes.

Those are planning uses only. The formula supplied here has the limitations described above, so its result should not be used for these decisions. For a real comparison, verify the arithmetic with a reliable tire sizing reference and confirm candidate sizes against the vehicle maker's documentation and the tire maker's specifications.

  • Record the size currently fitted and the size under consideration.
  • Compare the complete size codes, including wheel diameter.
  • Check load and speed ratings, approved rim-width range, and vehicle clearances.
  • Have a qualified tire professional confirm fitment where needed.

Other factors to consider when calculating tire size

Nominal sidewall markings do not describe every real-world dimension. Tire manufacturers may report measured dimensions under specified test conditions, and construction can vary between models with the same size code. Tread wear, inflation pressure, load, and operating conditions can also affect the tire's loaded radius or rolling circumference.

Fitment involves more than diameter. Tire width can affect clearance at the suspension, bodywork, and steering components. Wheel width and offset influence the mounted position. Load capacity and speed rating must meet the vehicle's requirements. Braking, handling, traction-control behavior, and speedometer accuracy may also be affected by changes in rolling size. Do not assume a percentage comparison alone establishes safety or compatibility.

For classic or modified vehicles, keep a record of the manufacturer's original size and any approved alternatives. If the vehicle has unusual wheels, limited clearance, or altered suspension, request a direct fitment check. A tire professional can assess the tire, rim, and vehicle together rather than relying on nominal dimensions alone.

Frequently asked questions

What do the numbers in a tire size mean?

In a common metric marking such as 205/55R16, 205 is nominal section width in millimeters, 55 is sidewall height as a percentage of width, R indicates radial construction, and 16 is the wheel diameter in inches.

Does this result show the actual tire diameter?

No. The supplied formula adds only one sidewall height to the wheel and reports a ratio times 100. It does not calculate a reliable overall diameter change.

Can I use the result to correct my speedometer?

No. The configured formula is not suitable for speedometer correction. Actual speedometer behavior depends on the vehicle and tire rolling characteristics. Consult vehicle documentation and a qualified professional.

Does a similar diameter mean a tire will fit?

No. Fit also depends on width, rim compatibility, clearance, load and speed ratings, and vehicle specifications. Confirm all of these before selecting a tire.

What information should I verify before changing tires?

Check the vehicle placard or manual, wheel specifications, candidate tire manufacturer's data, and applicable fitment guidance. A tire professional can confirm compatibility for the specific vehicle and wheel combination.

Written by

sandiegobritishcarday.org Editorial Team

Editorial team

Independent editorial coverage of classic british cars.