The SmallRig 2916 side handle review is for camera operators who want a compact grip that attaches directly to a compatible cage.
Its adjustable position and reversible setup suit either hand, while the small form factor and mounting limits make fit and rig weight worth considering.
SmallRig 2916 Handle Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig 2916 Mini Side Handle
A compact, repositionable cage handle for filmmakers who want a lightweight grip and mounting points for a microphone or flash.
- Designed for mirrorless, DSLR, and other small-camera cages with two side-facing 1/4-inch-20 threaded holes spaced 18 mm apart.
- Attaches to the cage with two 1/4-inch-20 screws.
- Slides up and down to adjust its position for different cage heights.
- Can be reoriented for left- or right-hand use, with a built-in wrench for adjustments.
Pros
- Compact 139 g design can suit a lightweight handheld rig.
- Sliding adjustment and reversible orientation offer flexibility for grip position and hand preference.
Consider before buying
- Compatibility depends on having two 1/4-inch-20 cage holes at the specified 18 mm spacing, so the mounting pattern needs checking.
- The mini-grip format may feel too small for buyers who prefer a larger handle.
Read the full review summary
The 2916 is a mini side grip for mirrorless, DSLR, and other small-camera cages with two 1/4-inch-20 threaded holes spaced 18 mm apart.
Two screws secure it to the cage, and the handle can slide up or down to suit the cage height and the operator’s preferred grip position. A built-in wrench helps with adjustment and switching the handle’s orientation.
At 139 g, it adds a modest amount of weight to a compact rig, and its cold shoe and eyelet create options for a flash or microphone and a wrist strap.
The stated maximum bearing capacity is 3.5 kg, so buyers should consider the fully configured setup and check compatibility with their exact cage before purchase.
This is a practical choice for filmmakers who want a small, adaptable side grip rather than a larger handle.
The buying factors
SmallRig 2916 Handle Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Cage compatibility
The two-screw connection is straightforward when the cage has the required pair of 1/4-inch-20 holes with 18 mm spacing; confirm those details on your cage.
Position adjustment
The handle slides up and down, and its orientation can be changed for left- or right-hand use.
Portability
Its 139 g weight and mini-grip design are well suited to keeping a camera rig compact.
Accessory mounting
A cold shoe and eyelet add useful mounting options for compatible accessories and a wrist strap.
Grip comfort
The ergonomic shape and aluminum alloy with PC+ABS construction are intended for comfortable handling, though personal fit will vary.
Rig load suitability
The stated 3.5 kg maximum gives a clear limit to check against the assembled camera setup.
Key Features and Specifications of SmallRig 2916 Handle
- Designed for mirrorless, DSLR, and other small-camera cages with two side-facing 1/4-inch-20 threaded holes spaced 18 mm apart.
- Attaches to the cage with two 1/4-inch-20 screws.
- Slides up and down to adjust its position for different cage heights.
- Can be reoriented for left- or right-hand use, with a built-in wrench for adjustments.
- Made from aluminum alloy and PC+ABS plastic; weighs 139 g.
- Includes a cold shoe for mounting a compatible flash or microphone and an eyelet for a wrist strap.
- Maximum bearing capacity is 3.5 kg; the product is described as a mini grip.
Pros and Cons of SmallRig 2916 Handle
Pros
- Compact 139 g design can suit a lightweight handheld rig.
- Sliding adjustment and reversible orientation offer flexibility for grip position and hand preference.
- Two-screw attachment provides a direct connection to cages with the specified threaded-hole layout.
- Cold shoe and eyelet add options for a microphone, flash, or wrist strap.
Consider before buying
- Compatibility depends on having two 1/4-inch-20 cage holes at the specified 18 mm spacing, so the mounting pattern needs checking.
- The mini-grip format may feel too small for buyers who prefer a larger handle.
- The 3.5 kg maximum bearing capacity calls for checking the total rig weight before adding equipment.
Who Should Buy SmallRig 2916 Handle?
Good fit
Consider the 2916 if your cage has the required threaded holes and you want a small grip that can be positioned to suit your hand.
The ability to slide it vertically and switch its orientation makes it adaptable to different cage heights and left- or right-hand operation.
It also makes sense for a compact rig where a cold shoe for a microphone or flash and an eyelet for a wrist strap would be useful.
Before buying, compare the full camera and accessory load with the 3.5 kg maximum and make sure the mini size matches your grip preference.
Who should skip it
Look elsewhere if you want a larger handhold; this model is explicitly designed as a mini grip.
Also skip it if your cage does not have two 1/4-inch-20 mounting holes spaced 18 mm apart, unless you have confirmed a compatible mounting arrangement.
SmallRig 2916 Handle: What to Check Before Buying
Confirm the cage mounting pattern
The defining fit requirement is a pair of 1/4-inch-20 threaded holes on the cage side, 18 mm apart.
Checking the cage manual or measuring its mounting points before purchase can prevent a mismatch; the handle’s two-screw attachment depends on that arrangement.
Set the grip for your hand
The handle slides up and down, which lets you choose its height relative to the cage.
Its connection can also be reversed for left- or right-hand use, giving operators some room to adapt the grip without changing the camera cage.
Keep the rig within the stated limit
The 3.5 kg maximum bearing capacity is relevant to the complete camera setup, not just the handle.
Weigh or add up the camera and attached equipment before relying on the grip, particularly when building out a rig with several accessories.
Treat the shoe and eyelet as useful extras
A cold shoe provides a place for a compatible microphone or flash, while the eyelet accepts a wrist strap.
These features help the grip serve as part of a compact rig, but buyers should plan how each accessory will sit and confirm it does not interfere with their handling.
Alternatives to SmallRig 2916 Handle
Camera Mounts & Clamps alternative

1,000+ ratings
Read Amazon ReviewsSmallRig 3766 Lightweight NATO Top Handle
Choose the 2916 for a side grip when your cage has the specified screw-hole pattern.
The 3766 is a better fit if you want a top handle and already have a compatible NATO rail, with more accessory mounting points.
- The 3766 is a top handle that mounts to a cage’s NATO rail, weighs 124 g, and has five cold shoe mounts and multiple threaded holes.
- Its NATO rail is sold separately.
- The 2916 is a side grip that attaches with two 1/4-inch-20 screws to a cage with holes 18 mm apart; it weighs 139 g and is reversible for either hand.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Cage Kit for Sony A6700
If you already own a compatible cage and need only a grip, the 2916 is the more direct choice.
Sony A6700 owners building out a cage may prefer the 4336 kit, which provides the camera-specific cage and mounting points for adding a 2916.
- The 4336 is a cage kit designed specifically for the Sony A6700.
- It provides 1/4-inch-20 and 3/8-inch-16 threaded holes, a cold shoe, an HDMI cable clamp, and an integrated Arca-Swiss plate; it also has a mounting point for a 2916 side handle.
- The 2916 is a standalone side handle that requires a compatible cage with two 1/4-inch-20 holes spaced 18 mm apart.
Is SmallRig 2916 Handle Worth It?
The SmallRig 2916 Mini Side Handle is worth considering for a compact camera rig when the cage matches its two-hole mounting pattern.
Its 139 g weight, adjustable position, reversible orientation, cold shoe, and wrist-strap eyelet make it a flexible small grip.
Check cage compatibility and total rig weight before buying, and keep its mini size in mind if you prefer a substantial handle.
For the right cage and a lightweight handheld setup, it offers a straightforward way to add a configurable side grip.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig 2916 Mini Side Handle
A compact, repositionable cage handle for filmmakers who want a lightweight grip and mounting points for a microphone or flash.
- Designed for mirrorless, DSLR, and other small-camera cages with two side-facing 1/4-inch-20 threaded holes spaced 18 mm apart.
- Attaches to the cage with two 1/4-inch-20 screws.
- Slides up and down to adjust its position for different cage heights.
- Can be reoriented for left- or right-hand use, with a built-in wrench for adjustments.