The SmallRig Super Clamp is a compact mounting point for cameras, lights, and other compatible accessories, with threaded holes for building out a rig.
This SmallRig Super Clamp review looks at where its adjustable jaw and padded contact surfaces can help—and what to check before mounting your setup.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for creators who need to attach compatible camera accessories to bars, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Aluminum alloy and stainless steel construction; listed weight is 0.13 kg.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
Pros
- The 15–40 mm jaw range suits a variety of appropriately sized mounting surfaces.
- Two thread sizes make it easier to connect a broader selection of compatible rig accessories.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum weight recommendation calls for careful attention to the combined load of the attached gear.
Read the full review summary
This clamp pairs a jaw that opens from 15 mm to about 40 mm with 1/4-inch and 3/8-inch threaded holes.
That combination gives it two roles: gripping a suitable surface and providing attachment points for accessories such as a compatible ball head or magic arm.
Its aluminum alloy and stainless steel construction keeps the listed weight to 0.13 kg.
It is best suited to camera and lighting setups where a compact clamp can secure a mounting point to an appropriately sized bar, shelf, or similar surface.
The rubber pads are intended to help resist slipping and scratching, while the listed maximum weight recommendation is 3.3 pounds.
Check the clamp’s fit and your complete accessory load before use, particularly when mounting equipment where movement could cause a fall.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Jaw range
The stated 15–40 mm opening covers a useful range of bars and edges, provided the mounting surface falls within those limits.
Mounting flexibility
Both 1/4-inch and 3/8-inch threaded holes support a range of accessory connections.
Contact protection
Rubber pads are designed to limit slipping and scratching at the clamp surfaces.
Portability
At 0.13 kg and described as compact when folded, it should be easy to include in a camera kit.
Load guidance
The listed maximum weight recommendation gives a useful reference, though buyers still need to account for the full setup and mounting conditions.
Versatility
It can grip more than one kind of surface, but the jaw range and the chosen attachment determine where it will work.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Aluminum alloy and stainless steel construction; listed weight is 0.13 kg.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- Listed maximum weight recommendation is 3.3 pounds.
- The package includes one super clamp.
Pros and Cons of SmallRig Super Clamp
Pros
- The 15–40 mm jaw range suits a variety of appropriately sized mounting surfaces.
- Two thread sizes make it easier to connect a broader selection of compatible rig accessories.
- Rubber contact pads are a useful touch where surface marks or slippage are a concern.
- Its listed 0.13 kg weight makes it a manageable piece to carry with camera gear.
Consider before buying
- The jaw range rules out surfaces thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum weight recommendation calls for careful attention to the combined load of the attached gear.
- It is not water resistant, so it is not a choice for setups that require water protection.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider this clamp if you need a compact way to secure a camera accessory to a bar, shelf edge, or another surface that fits its jaw.
Its threaded holes let you attach compatible accessories directly, or use a suitable arm or head to position equipment away from the clamp.
Before buying, measure the intended mounting surface and confirm the accessory connection you need. Keep the total equipment load within the stated recommendation, and check that the surface and clamp are firmly seated before putting gear in position.
Who should skip it
Skip it if your mounting surface is outside the 15–40 mm jaw range, or if your setup needs a water-resistant clamp. For heavier equipment, choose a mount whose stated capacity fits the complete assembly with appropriate margin.
How the SmallRig Super Clamp Fits a Camera Rig
Measure the mounting surface first
The jaw opens to about 40 mm and has a 15 mm minimum. Measuring the bar or edge before choosing a mounting position is the simplest way to avoid a clamp that cannot close securely around the surface.
Threaded holes expand the setup
The 1/4-inch and 3/8-inch threaded holes give this clamp a role beyond simply gripping a surface.
They let a compatible accessory attach to it, so check the thread size at both ends of your intended connection before assembling the rig.
Treat the load recommendation as a limit to plan around
The listed maximum weight recommendation is 3.3 pounds.
Account for the camera or accessory, any arm or adapter, and the way the setup will be positioned; a longer or offset arrangement can change how carefully you need to manage the mount.
Pads help protect the contact points
The rubber pads are intended to reduce slipping and scratching where the clamp meets a surface. They do not remove the need to check the contact area and tighten the clamp appropriately for the specific surface and gear.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig Magic Arm Clamp Kit
Choose the main clamp if you need a compact clamp with both 1/4-inch and 3/8-inch accessory threads. Consider the kit when the wider jaw range and included articulating arm better suit your mounting surface and positioning needs.
- This kit combines a clamp with a 9.8-inch articulating arm, 1/4-inch screws at both ends, and a 15–54 mm jaw range.
- Its double ball head design allows 360-degree adjustment.
- The SmallRig Super Clamp has 1/4-inch and 3/8-inch threaded holes, a 15–40 mm jaw range, and a listed 3.3-pound maximum weight recommendation.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Double Clamp Mount
The main clamp is the simpler option when one attachment point and its thread sizes meet your needs.
Consider the double clamp when your setup calls for two gripping points, a broader stated rod range, or the alternative’s articulated connection.
- This model has two clamps, a 360-degree double ball head, and is specified for rods from 14 mm to 60 mm.
- Its stated maximum load capacity is 3.5 kg.
- The SmallRig Super Clamp is a single clamp with a jaw range of 15–40 mm and threaded holes for connecting accessories.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering for a compact camera rig that needs a padded grip on a surface between 15 and about 40 mm thick, plus threaded attachment points for compatible accessories.
Its modest listed weight recommendation and non-water-resistant design make it important to match the clamp to the complete setup and intended conditions.
Measure the mounting point, confirm the thread connection, and keep the assembled load within the stated guidance before buying.
If those details fit your use, this clamp offers a straightforward way to add a mounting point without carrying a larger rig component.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for creators who need to attach compatible camera accessories to bars, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm and closes to a minimum of 15 mm.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Aluminum alloy and stainless steel construction; listed weight is 0.13 kg.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.