Product Reviews

VEVOR K560 4 Ton Floor Jack Review

A steel, low-profile jack for home mechanics who want broad lifting range and a manual dual-pump design for garage maintenance.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The VEVOR 4 Ton Low Profile review centers on a steel floor jack built for lifting cars, trucks, and SUVs, with a low 3.94-inch starting height and a maximum lift of 20.98 inches.

Its manual dual-pump system and long handle suit garage users who value lifting capacity and range over a compact, powered roadside kit.

VEVOR K560 Jack Review Summary

The quick verdict

VEVOR K560 4 Ton Floor Jack
4.3/5

1,000+ ratings

Read Amazon Reviews

VEVOR K560 4 Ton Floor Jack

A steel, low-profile jack for home mechanics who want broad lifting range and a manual dual-pump design for garage maintenance.

  • Rated for a 4-ton (8,800-pound) load capacity.
  • Lifting range runs from 3.94 inches (100 mm) to 20.98 inches (533 mm).
  • Dual parallel pump system is designed to reach maximum height in seven strokes.
  • Heavy-strength steel construction with steel wheels; the two rear wheels are universal for steering and rolling.

Pros

  • Low 3.94-inch minimum height can suit vehicles with limited clearance, if the jack fits the chosen lift point.
  • The 4-ton capacity and nearly 21-inch maximum lift provide a broad working range for compatible vehicles.

Consider before buying

  • At 93 pounds and 33.5 inches long, it is a substantial tool to move and store.
  • Manual operation requires working the 52-inch handle; buyers seeking powered roadside lifting should consider a different format.
Read the full review summary

The K560 combines a 4-ton capacity with a 3.94-to-20.98-inch lifting range, putting it in consideration for routine wheel, brake, and under-car maintenance when the jack fits the vehicle’s approved lifting points.

Its dual parallel pump is designed to reach maximum height in seven strokes, while the 52-inch handle provides leverage for manual operation.

This is a substantial steel jack: it weighs 93 pounds and measures 33.5 by 17.1 by 9.3 inches.

The steel wheels, including two universal rear wheels, are intended to help with positioning, and the handle separates into two pieces for storage.

Check the vehicle’s lifting point height, required lift, and the jack’s capacity before buying; a low starting height alone does not confirm compatibility.

The buying factors

VEVOR K560 Jack Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Capacity for supported vehicles

The 4-ton rating gives headroom for many garage lifting tasks, subject to the vehicle’s requirements and correct lifting procedure.

8/10

Low-profile access

A 3.94-inch minimum height may help with lower vehicles, but buyers should compare it with their car’s actual clearance at the lifting point.

8/10

Lifting range

The 20.98-inch maximum gives a broad stated range for raising vehicles; confirm that it meets the height needed for your work.

7/10

Manual lift speed

The dual parallel pump is designed to reach maximum height in seven strokes, offering a useful efficiency feature without powered operation.

6/10

Positioning and storage

Steel wheels and a two-piece handle support maneuvering and more compact storage, though the jack itself is still a 93-pound, full-size tool.

7/10

Vehicle contact features

A rubber saddle and foam handle bumper are intended to protect contact areas, and the saddle can rotate and detach for replacement.

Key Features and Specifications of VEVOR K560 Jack

  • Rated for a 4-ton (8,800-pound) load capacity.
  • Lifting range runs from 3.94 inches (100 mm) to 20.98 inches (533 mm).
  • Dual parallel pump system is designed to reach maximum height in seven strokes.
  • Heavy-strength steel construction with steel wheels; the two rear wheels are universal for steering and rolling.
  • Includes a 360-degree rotatable, detachable rubber saddle and a foam bumper on the handle.
  • The 52-inch (1,320 mm) handle separates into two pieces for storage.
  • The product description lists CE, UKCA, and ASME PALD-2014 standards and a built-in system intended to prevent use beyond load capacity.

Pros and Cons of VEVOR K560 Jack

Pros

  • Low 3.94-inch minimum height can suit vehicles with limited clearance, if the jack fits the chosen lift point.
  • The 4-ton capacity and nearly 21-inch maximum lift provide a broad working range for compatible vehicles.
  • Dual parallel pumps are designed to reduce the number of strokes needed to reach the top of its range.
  • Rotating, replaceable rubber saddle and foam handle bumper add protective contact features.
  • Two-piece handle and rolling steel wheels aid storage and positioning for a heavy floor jack.

Consider before buying

  • At 93 pounds and 33.5 inches long, it is a substantial tool to move and store.
  • Manual operation requires working the 52-inch handle; buyers seeking powered roadside lifting should consider a different format.
  • The 20.98-inch maximum may not provide enough height for every vehicle or repair task, so compare it with your specific requirements.

Who Should Buy VEVOR K560 Jack?

Good fit

Consider the VEVOR K560 if you maintain compatible vehicles in a garage and want a steel floor jack with a low starting height, 4-ton capacity, and a relatively high maximum lift.

The dual-pump design, long handle, and rolling wheels make its manual format more practical for repeated positioning and lifting than a small emergency jack.

Before choosing it, measure the clearance at the vehicle’s intended lifting point and check that the maximum lift meets your work needs.

Also plan where a 93-pound jack will live and how you will move it around your workspace.

Who should skip it

Skip this design if you need a lightweight jack that is easy to carry in a vehicle or prefer an electrically powered tool for roadside tire changes.

Its weight and manual handle are better suited to a garage than frequent transport.

Look elsewhere if your vehicle’s lift point sits below 3.94 inches, or if your repair requires more than 20.98 inches of lift. Verify fit and use suitable support equipment for the job.

VEVOR K560 Jack: What Its Range Means in a Garage

Low clearance and lift-point fit

The 3.94-inch minimum is the key fit dimension for a low-profile jack. Measure the gap at the specific point where the jack will contact the vehicle, since another part of the chassis may sit lower or higher.

The jack needs to fit under the correct lift point, not merely under the vehicle’s outer edge.

Capacity and useful height

A 4-ton rating and 20.98-inch maximum are different parts of the buying decision: capacity concerns the supported load, while maximum height concerns access for the task. Confirm both against the vehicle and the work planned.

The product’s broad range can cover varied jobs, but the figures do not establish suitability for every vehicle.

Manual pumping and garage workflow

The dual parallel pump is designed to raise the jack to its maximum in seven strokes, while the 52-inch handle supplies leverage. This setup keeps operation manual and gives the user control through pumping.

It also means the jack needs room for the handle’s movement and a stable place to roll and position its 93-pound frame.

Contact points and storage

The rubber saddle rotates through 360 degrees and can be detached and replaced; the foam handle bumper is another protective detail. Steel wheels are intended to help with steering and rolling, while the two-piece handle separates for storage.

These features make it easier to accommodate in a garage, though they do not make the jack compact or light.

Alternatives to VEVOR K560 Jack

Battery-focused alternative

VEVOR 5 Ton Electric Hydraulic Car Jack Kit
4.3/5

4,000+ ratings

Read Amazon Reviews

VEVOR 5 Ton Electric Hydraulic Car Jack Kit

Choose the K560 if low-profile access and a higher maximum lift matter more than powered operation.

Consider the electric kit for roadside or home tire changes if its higher minimum height fits your vehicle and you want the bundled wrench and inflator.

  • This electric kit has a 5-ton capacity and a stated 6.1-to-16.5-inch lifting range.
  • It also includes an impact wrench, tire inflator, LED light, and power connections for a car battery or cigarette-lighter port.
  • The K560 is a manual steel floor jack with a 3.94-to-20.98-inch lift range, 52-inch two-piece handle, and 93-pound weight.

Floor Jacks alternative

VEVOR 6 Ton Air Jack
4.4/5

700+ ratings

Read Amazon Reviews

VEVOR 6 Ton Air Jack

The K560 may fit buyers who need lower initial access and want a manual jack without a compressor.

Consider the air jack if your setup has a compatible compressor and the higher capacity or lift height better suits your work.

  • This air jack has a 6-ton capacity and a maximum height of 26.5 inches with its heightened column; without that column, the listed minimum height is 6.7 inches.
  • It requires an air compressor and weighs 56.7 pounds.
  • The K560 uses manual pumping, starts at 3.94 inches, and lifts to 20.98 inches, with a 4-ton capacity.

Is VEVOR K560 Jack Worth It?

The VEVOR K560 is worth considering as a garage floor jack for buyers who need a low-profile starting height, 4-ton capacity, and lift up to 20.98 inches.

Its dual-pump design and protective saddle details are useful, while its substantial weight and manual operation make it less suitable as a portable emergency tool.

Check the vehicle’s approved lift points, clearance, required height, and load needs before buying.

If those measurements fit and you have room to store and position a 93-pound jack, the K560 offers a practical manual setup for home maintenance.

Your review at a glance

VEVOR K560 4 Ton Floor Jack
4.3/5

1,000+ ratings

Read Amazon Reviews

VEVOR K560 4 Ton Floor Jack

A steel, low-profile jack for home mechanics who want broad lifting range and a manual dual-pump design for garage maintenance.

  • Rated for a 4-ton (8,800-pound) load capacity.
  • Lifting range runs from 3.94 inches (100 mm) to 20.98 inches (533 mm).
  • Dual parallel pump system is designed to reach maximum height in seven strokes.
  • Heavy-strength steel construction with steel wheels; the two rear wheels are universal for steering and rolling.

Written by

sandiegobritishcarday.org Editorial Team

Editorial team

Independent editorial coverage of classic british cars.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

VEVOR K560 4 Ton Floor Jack

VEVOR K560 4 Ton Floor Jack

A steel, low-profile jack for home mechanics who want broad lifting range and a manual dual-pump design for garage maintenance.

  • Rated for a 4-ton (8,800-pound) load capacity.
  • Lifting range runs from 3.94 inches (100 mm) to 20.98 inches (533 mm).
Check Video Reviews on Amazon